工廠供電技術實訓室
一、實訓室設備：
工廠供電技術實訓室面積60平方米，擁有工廠供電技術實訓裝置（THSPGC-1B）2臺套、常用實物器件及多媒體教學設備，實訓裝置包括控制屏、控制柜和繼保柜等，可滿足電氣自動化技術、機電一體化技術等專業的《工廠供電》課程實訓教學。
二、主要實訓項目：
1、實訓臺電氣主接線模擬圖的認知
2、電氣主接線圖的認知
3、電流互感器與電壓互感器的接線方式
4、變壓器有載調壓
5、工廠供電倒閘操作
6、模擬系統正常、最大、最小運行方式
7、模擬系統短路實訓
8、微機線路保護裝置參數整定操作
9、無時限電流速斷保護實訓
10、帶時限電流速斷保護實訓
11、微機定時限過電流保護實訓
12、反時限過電流保護實訓
13、電流電壓連鎖保護實訓
14、備投投入條件測試
15、進線備投（明備用）及自適應實訓
16、無功自動補償實訓
17、變壓器電流速斷供電線路帶時限的過電流保護
18、配電變壓器的過負荷保護
Factory Power Supply Technology Training Room
1、 Training room equipment:
The factory power supply technology training room covers an area of 60 square meters and has 2 sets of factory power supply technology training devices (THSPGC-1B), commonly used physical devices, and multimedia teaching equipment. The training devices include control screens, control cabinets, and relay protection cabinets, which can meet the training requirements of 《Factory Power Supply》courses for majors such as electrical automation technology and mechatronics integration technology.
2、 Main practical training projects:
1. Cognition of the Electrical Main Wiring Simulation Diagram of the Training Platform
2. Cognition of Electrical Main Wiring Diagram
3. Wiring method of current transformer and voltage transformer
4. Transformer on-load voltage regulation
5. Factory power supply switching operation
6. Simulate normal, maximum, and minimum operating modes of the system
7. Simulated System Short Circuit Training
8. Parameter setting operation of microcomputer line protection device
9. Training on Time Limited Current Quick Break Protection
10. Training on Time Limited Current Quick Break Protection
11. Practical training on microcomputer timed overcurrent protection
12. Inverse time overcurrent protection training
13. Practical Training on Current and Voltage Interlock Protection
14. Condition test for standby operation
15. Incoming backup (open backup) and adaptive training
16. Practical Training on Reactive Power Automatic Compensation
17. Overcurrent protection with time limit for transformer current quick break power supply lines
18. Overload protection of distribution transformers
